Hoist Motor Field and/or Brake Controls

	C218 15A Hoist Motor Field/Brake Control The IPC Automation model C218 Hoist motor field/Brake controller is a perfect fit for reliable low cost field or brake applications. The C218 can be set for either brake or Field mode by simple configuration of resistance at the input terminals. Provisions are made to readily accept a third Input phase to momentarily boost the output DC voltage to 150% of the nominal rating (approx. 270 VDC max) for motor field forcing at leveling speed or quick brake release. On-board user adjustable sensing circuit detects output current to the field or brake and operates a fail-safe relay if the current falls below the preset point. Internal soft start ramp timing prevents hard stops or starts. Find out more >
	C1074 5A Hoist Motor Field/Brake Control The IPC Automation model C1074 Hoist motor field/Brake controller is a perfect fit for reliable low cost field or brake applications. The C1074 can be set for either brake or Field mode by simple configuration of resistance at the input terminals. Provisions are made to readily accept a third Input phase to momentarily boost the output DC voltage to 150% of the nominal rating (approx. 270 VDC max) for motor field forcing at leveling speed or quick brake release. On-board user adjustable sensing circuit detects output current to the field or brake and operates a fail-safe relay if the current falls below the preset point. Internal soft start ramp timing prevents hard stops or starts. Find out more >
	D2120 Combination Hoist Motor Field & Brake Control The IPC Automation model D2120 offers true three-phase hoist motor field and brake control in one easy-to-use package. The D2120 provides multiple field and brake setpoints, separately adjustable ramp-up and ramp-down rates, full LED status indication and a host of other features designed to make it an ideal fit for reliable field and brake applications. With the ability to operate in the either the current or voltage regulation modes, the D2120 will maintain precise output settings regardless of changing load impedance, temperature and line-voltage variations. The compact D2120 requires a minimum of connections, provides on-board fusing and will easily interface to PLC or relay controllers. Find out more >
	D2130 30 Amp Hoist Motor Field/Brake Control The IPC Automation model D2130 offers true three-phase hoist motor field or brake control in a high-power rugged package. The D2130 provides multiple setpoints, separately adjustable ramp-up and ramp-down rates, full status indication and a host of other features designed to make the 2130 an ideal fit for jobs with large fields or brake coils. With the ability to operate in the either the current or voltage regulation modes, the D2130 will maintain precise output settings regardless of changing load impedance, temperature and line-voltage variations. Input interlock circuitry selects the highest numerical order input if all are selected at the same time. Fail-safe current detection safety relay with adjustable setpoint. Find out more >